Ricoh Pentax K-S2, Руководство по эксплуатации

Страница: 58 / 148

3
56
Shooting
1
Press G in standby mode.
2
Select [AF Active Area] and press E .
The [AF Active Area] screen appears.
3
Select the desired focus
point selection mode and
press E .
The control panel reappears.
4
Press F .
The camera returns to standby mode.
If you selected E or 8 in Step 3, proceed to Step 5.
5
Select the desired AF point.
Available operations
t Memo
• When E or 8 is selected, the E lamp lights up.
• The AF point can also be changed from [AF Active Area]
of [AF Settings] in the
A
1 menu.
• You can also set the camera so that switching to the Change
AF Point mode by pressing and holding E can be operated
with P . (p.100)
Selecting the Focusing Area (AF Point)
v / A 1
6
Auto (11
AF Points)
Out of the 11 AF points, the camera
automatically selects the optimum
focusing area.
7
Auto (5 AF
Points)
Out of the 5 AF points, the camera
automatically selects the optimum
focusing area.
E Select
Sets the focusing area to the user
selected point from 11 points.
8
Expanded
Area AF
Sets the focusing area to the user
selected point from 11 points.
When the subject happens to move out
of the selected focusing area after being
focused, 8 peripheral points are used
as back-up points.
Not available in x mode.
D Spot
Sets the focusing area to the center
of the 11 points.
AF Active Area AF Active Area
Auto (11 AF Points)
Auto (11 AF Points)
Cancel Cancel OK OK
ABCD Changes the AF point.
E Returns the AF point to
the center.
Press and hold E Switches the function of
the arrow keys ( ABCD )
to the Change AF Point mode
or the direct key operation.
1/ 1/
250 250
800 800
FF
5.6 5.6
99999 99999
KS2_OPM_EN.book Page 56 Friday, February 20, 2015 12:10 PM