Ricoh Pentax 645Z, Руководство по эксплуатации

Страница: 130 / 172

R16
A
Takes three consecutive images at three different exposure
levels to create a single composite picture with them.
1
A
D .
The [HDR Capture] screen appears.
2
E .
3
Select from ±1, ±2, or ±3.
4
5 F
The camera returns to standby mode.
HDR Capture is not available in
M
or
N
mode.
This function cannot be used in combination with some other
functions. (p.R44)
When the drive mode is set to [Interval Shooting], [Auto Align]
is fixed to off.
For HDR Capture, multiple images are combined together to
create a single image, so it will take time to save the image.
The following features are available.
Corrections can only be made when a D FA645 or FA645 lens
is attached to the camera. (
w
p.28) The features are disabled
when using an accessory such as a rear converter that is attached
between the camera and the lens.
For RAW images, correction information is saved as a RAW file
parameter and you can select whether to apply the correction to
the images when developing them. For the RAW Development
function, [Color Fringe Correction] can also be set. (
w
p.82)
Expands the dynamic range and
enables a wider range of tones
by the CMOS sensor and reduces
the occurrence of overexposed/
underexposed areas. Set [Highlight
Correction] to [AUTO], [ON], or [OFF],
and set [Shadow Correction] to
[AUTO], [Low], [Medium], [High] or [OFF].
A v
T
Uses Auto Align.
S
Does not use Auto Align.
The Shake Reduction function on the lens is disabled.
Cancel Cancel OK OK
HDR Capture HDR Capture
Exposure Bracket Value Exposure Bracket Value
Auto Align Auto Align
HDR Capture HDR Capture
A v
Reduces distortions occurring due to lens properties.
Reduces lateral chromatic aberrations occurring
due to lens properties.
Reduces peripheral light fall-off occurring due
to lens properties.
Corrects the diffraction when the aperture is small.
A v
Highlight Correction Highlight Correction
Shadow Correction Shadow Correction
D-Range Settings D-Range Settings