Ricoh Network Scanning Unit A, Руководство по эксплуатации, Страница: 178 / 206

Appendix
170
11
Print Scan operation error messages
Exceeded max. scan pages. To
scan remaining pages as a new
job, press [Exit] then press
the Start key.
[ Exit ]
• Continued scanning and reached the max-
imum scan limit (100 pages). Press [ Exit ] .
The scanned original is sent. The specified
destination and scanning condition set-
tings remain the same even after you have
pressed
[ Exit ] . Place the next original and
press the
{{{{
Start
}}}}
key.
Message Possible Cause and Required Action
Printer is offline. Check
the printer.
[ Exit ]
• The printer you have selected for printing is currently
offline. Press the
{{{{
Online
}}}}
key on the printer to make it
online. Press
[ Exit ]
to start printing.
The printer is current-
ly in use. Cannot print.
[ Exit ]
• The printer is currently in use. Press [ Exit ] to cancel the
print job (this discards the scan data), and try again lat-
er.
Selected printer is not
supported. Check the
printer.
[ Exit ]
• The printer is not compatible with this machine. Select
other printer that is supported for use with this ma-
chine.
No response from the de-
vice. Check the power
and cables.
[ Exit ]
• The printer is not responding. Check if the printer is
turned on, and the cables are connected correctly.
Warming up... Check the
printer.
[ Exit ]
• The printer is not ready to print, because it is still
warming up. Wait until the printer gets ready.
Add paper to the printer.
[ Exit ]
• Take the necessary action in accordance with the mes-
sage that is displayed. See the manual that comes with
the printer for information about adding paper, replac-
ing toner bottle, closing the cover of the printer, or
clearing misfeeds.
Add Toner Replace Toner
Bottle in the printer.
[ Exit ]
Cover Open Check the
printer.
[ Exit ]
Paper Misfeed Check the
printer.
[ Exit ]
Functional Problems Check
the printer.
[ Exit ]
• The printer has functional problems other than those
mentioned above. Check to make sure that the printer
operates normally. See the manual that comes with the
printer.
Message Possible Cause and Required Action