Ricoh MP C305SPF, Руководство по обслуживанию на месте, Страница: 59 / 146

SP2-XXX (RAM Data)
2 Mode No. Function
101
RAM Read/Write
001
Change RAM data for the fax board directly.
"Service RAM Addresses"
102
Memory Dump
001 G3-1 Memory Dump
Print out RAM data for the fax board.
"Service RAM Addresses"
103
G3-1 NCU Parameters
001 – 023 CC, 01 – 22
NCU parameter settings for the standard G3 board.
"NCU Parameters"
SP3-XXX (Tel Line Settings)
3 Mode No. Function
101
Service Station
001 Fax Number Enter the fax number of the service station.
002 Select Line Select the line type.
102
Serial Number
000 Enter the fax unit’s serial number.
103
PSTN-1 Port Settings
001 Select Line
Select the line type setting for the G3-1 line. If the
machine is installed on a PABX line, select “PABX”,
“PABX(GND)” or “PABX(FLASH)”.
002
PSTN Access
Number
Enter the PSTN access number for the
G3-1 line.
003
Memory Lock
Disabled
Not used
Service Tables
57