Ricoh MP 2590, Справочник сканера

Страница: 138 / 158

Various Scan Settings
130
6
Scan Settings When Using Twain Scanner
This section explains how to specify original orientation and scan setting for a
bundle of mixed size originals when using the TWAIN scanner.
Setting Original Orientation on the TWAIN Scanner
To correctly display the top/bottom orientation of the scanned original on a cli-
ent computer, the placement of the original and the settings made in the Scanner
Control dialog box must match.
A
Open the Scanner Control dialog box.
For details about how to open the Scanner Control dialog box, see "Basic Net-
work TWAIN Scanner Operation".
B
In the [ Original Scan Method: ] list, select the place where the original is placed.
C
In the [ Orig.Orientn.: ] list, select [ ] or [ ] .
D
In the [ Orientation: ] list, select [ / ] , [ / ] ,
[ / ] , or [ / ] .
E
If an original is placed in the ADF, from the drop down menu of [ Scan Set-
tings ] , select [ 1 Sided ] , [ 2 Sided(Top to Top) ] , or [ 2 Sided(Top to Bottom) ] .
Reference
p.97 “Basic Network TWAIN Scanner Operation”
Placing Originals
The following table shows the relationship between the original orientation and
the Scanner Properties dialog box settings:
❖
Exposure Glass
Original Orientation TWAIN Scanner Control Dialog Box Key
top edge touches top left of exposure glass
This orientation is the TWAIN driver's stand-
ard setting. Place originals in this orientation
normally.
top edge touches rear of exposure glass