Ricoh MP 2001L Скачать руководство пользователя страница 27

Страница: 27 / 120

Turning On the Power

This machine has two power switches.

Operation switch (right side of the control panel)

Press to activate the machine. When the machine has finished warming up, you can operate the
machine.

Main power switch (left side of the machine)

Turning off this switch makes the main power indicator on the right side of the control panel go off.
When this is done, machine power is completely off.

• This machine automatically turns the panel off or turns itself off if you do not use it for a while. See

General Settings Guide.

Turning On the Main Power

Make sure the power cord is firmly plugged into the wall outlet.

Turn on the main power switch.

The main power indicator goes on.

CUA103

• Do not turn off the main power switch immediately after turning it on. Doing so may result in

damage to the memory, leading to malfunctions.

Turning On the Power

Press the operation switch.

The On indicator goes on.

Содержание MP 2001L

























































































































Результаты поиска

Содержание MP 2001L

Отзывы:

Ricoh MP 2001L, Руководство по эксплуатации, Страница: 27 / 120

Результаты поиска

Содержание MP 2001L

Отзывы: