Ricoh MP 2001L Скачать руководство пользователя страница 25

Страница: 25 / 120

18. [Escape] key

Press to cancel an operation or return to the previous display.

19. [OK] key

Press to set a selected item or entered numeric value.

20. Number keys

Press to enter numeric values.

21. [Start] key

Press to start copying, printing, or scanning.

22. [Clear/Stop] key

• Clear:

Clears an entered numeric value.

• Stop:

Stops a job in progress, such as scanning or printing.

Display

This section explains how to read the display and use the selection keys for the initial copy display.

• The copy display is set as the default screen when the machine is turned on.

Initial copy display

CUA140

1. Operational status or messages

2. Messages and the selected tray appear here. Currently selected items appear in brackets.

3. Number of copies set.

4. Reduce/Enlarge ratio function for non-fixed ratios.

Содержание MP 2001L

























































































































Результаты поиска

Содержание MP 2001L

Отзывы:

Ricoh MP 2001L, Руководство по эксплуатации, Страница: 25 / 120

Результаты поиска

Содержание MP 2001L

Отзывы: