Ricoh M022, Руководство по обслуживанию

Страница: 353 / 1152

When installing a new HDD unit
1. Turn the main power switch on. The disk is automatically formatted.
2. Install the stamp data using "SP5853".
3. Switch the machine off and on to enable the fixed stamps for use.
Disposal of HDD Units
• Never remove an HDD unit from the work site without the consent of the client.
• If the customer has any concerns about the security of any information on the HDD, the HDD must
remain with the customer for disposal or safe keeping.
• The HDD may contain proprietary or classified (Confidential, Secret) information. Specifically, the
HDD contains document server documents and data stored in temporary files created automatically
during copy job sorting and jam recovery. Such data is stored on the HDD in a special format so it
cannot normally be read but can be recovered with illegal methods.
Reinstallation
Explain to the customer that the following information stored on the HDD is lost when the HDD is replaced:
• Address book
The address book and document server documents (if needed) must be input again.
If you previously backed up the address book to an SD card with SP5846 051, you can use SP 5846
052 to copy the data from the SD card to the hard disk.
If the customer is using the following options, each option function must be set up again. For more, see
each reference guide.
• Data Overwrite Security Unit: See "Security Guide".
• HDD Encryption Unit: See "Security Guide".
• ELP NX: see "Enhanced Locked Print NX Administrator's Guide".
Controller Fan
1. Rear cover ( p.147)
2. Controller box cover ( p.342)
Electrical Components
351
4
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA