Ricoh LI-MF1 M126, Руководство по обслуживанию на месте

Страница: 110 / 324

2. At the right side of the transfer roll, squeeze the holder arms (A) with the left hand while lifting. Stop
when the holder is unlatched.
3. At the left side of the transfer roll, squeeze the holder arms with the right hand while lifting with the
left hand. Stop when the left holder is unlatched.
4. With a hand at each end, lift the transfer roll out.
• Do not try removing the spring on the left; it is not removable but can be dislodged. The spring
included with the FRU is to be used only if the old right-side spring is damaged or lost. Both
springs must be positioned on posts that cannot be seen. If the old springs are moved, then
feel the base of the springs to assure that they are on the posts. The top of the springs must be
captured in the bearings of the transfer roll.
Upper Front Guide Assembly Removal
1. Open the front access door.
4. Replacement and Adjustment
108
4