Ricoh LD528, Руководство по эксплуатации

Страница: 47 / 140

Using as a NetWare Print Server / Remote
Printer
This describes how to set up the Windows computer used as the NetWare client.
• To install this printer driver under Windows 2000/XP, and Windows Server 2003/2003 R2, you
must have an account that has Manage Printers permission. Log on as an Administrators or Power
Users group member.
• IPX/SPX (NetWare) cannot be used under Windows Vista and Windows Server 2008.
• In an IPv6 environment, NetWare servers cannot be used.
The following explanation assumes NetWare Client is installed on the client computer and the NetWare
server environment is correctly set up. Install all necessary client applications before following this
procedure.
Set up the printer driver while logging on to the NetWare file server.
The following values are used in the example:
• NetWare version: 4.1
• File server name: CAREE
• Queue name: R-QUEUE
1. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on the
CD-ROM root directory.
2. Select an interface language, and then click [OK].
The default interface language is English.
3. Click [PCL Printer Driver].
4. The software license agreement appears in the [License Agreement] dialog box.
After reading the agreement, click [I accept the agreement.], and then click [Next >].
5. Select the printer driver you want to use in the [Select Program] dialog box.
You can select several printer drivers.
The PCL 6 printer driver is installed in the language specified by your operating system.
6. Click [Next >].
7. Select the [Printer Name] check box to select the printer model you want to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
Using as a NetWare Print Server / Remote Printer
45
1