Ricoh InfoPrint 1892, Руководство пользователя

Страница: 74 / 96

M
AKE SURE THE PRINTER HAS ENOUGH MEMORY
Add printer memory.
Unexpected page breaks occur
I
NCREASE THE
P
RINT
T
IMEOUT VALUE
1
Make sure the printer is on and
Ready
appears.
2
On the home screen, touch .
3
Touch Settings .
4
Touch General Settings .
5
Touch the down arrow until
Timeouts
appears.
6
Touch Timeouts .
7
Touch the left or right arrow next to
Print Timeout
until the desired value appears.
8
Touch Submit .
9
Touch .
Solving option problems
Settings chosen from the software program or application can change or override settings chosen from the printer
control panel. If an option is not functioning, then make sure it is selected in the software as well as the printer control
panel.
Option does not operate correctly or quits after it is installed
These are possible solutions. Try one or more of the following:
R
ESET THE PRINTER
Turn the printer off, wait about 10 seconds, and then turn the printer on.
C
HECK TO SEE IF THE OPTION IS CONNECTED TO THE PRINTER
1
Turn the printer off.
2
Unplug the printer.
3
Check the connection between the option and the printer.
M
AKE SURE THE OPTION IS INSTALLED CORRECTLY
Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option is not
listed, then reinstall it. For more information, see the hardware setup documentation that came with the option
or see the
User's Guide on the Publications CD that came with your printer.
Troubleshooting
72