Ricoh IM 350, Руководство пользователя

Страница: 194 / 312

setting procedure of the Auto Tray Switching function, see "General Features", Copy/Document
Server.
• When you are using 45K copy and print paper, loading the paper fully up to load limit mark (MAX
mark) may cause paper jams. Load the number of sheets of paper described below, as a guide.
• Lower paper tray (500 sheets)
• A4 : 500 sheets or less
• B5 : 500 sheets or less
• A5 : 250 sheets or less
• We recommend that you use the bypass tray when you use a paper size smaller than the sizes
above.
• Lower paper tray (250 sheets)
• A4 : 250 sheets or less
• B5 : 250 sheets or less
• A5 : 125 sheets or less
• We recommend that you use the bypass tray when you use a paper size smaller than the sizes
above.
When Loading Thick Paper
This section gives you various details about and recommendations concerning thick paper.
• When loading thick paper of 106–256 g/m
2
(28 lb. Bond–68 lb. Index) in the paper trays or
bypass tray, follow the recommendations below to prevent misfeeds and loss of image quality.
When loading thick paper of 106–163 g/m
2
(28 lb. Bond–90 lb. Index) in the paper trays, or 106–
220 g/m
2
(28 lb. Bond–80 lb. Cover) in the bypass tray, follow the recommendations below to
prevent misfeeds and loss of image quality.
• Store all your paper in the same environment - a room where the temperature is 20–25°C (68–
77°F) and the humidity is 30–65%.
• Jams and misfeeds can occur when printing on thick smooth paper. To prevent such problems, be
sure to fan smooth paper thoroughly before loading them. If paper continues to become jammed or
feed in together even after they are fanned, load them one by one from the bypass tray.
• When loading thick paper, set the paper direction according to its grain, as shown in the following
diagram:
8. Adding Paper and Toner
192