Ricoh GWD2004 Скачать руководство пользователя страница 167

Страница: 167 / 190

Using the Document Server

149

Press

[

Continue

]

Printing will be resumed.

Note

❒

The range of print copies enterable in step

depends on the timing of your

pressing the

{

Clear/Stop

}

key.

Sample Print

When print copies are massive, you can print a single copy in advance to check
the printing order of the selected documents and the printing conditions.

Important

❒

This feature is enabled when the sort function is selected in the printing conditions.

Select the document to be printed.

When a password is set, enter it, and then press

[

]

Press the

{

Sample Copy

}

key.

Only one copy will be printed.

Press

[

Continue

]

Printing will be resumed.

Note

❒

When canceling the printing, press

[

Suspend

]

. The print screen will appear,

enabling to set another item.

Содержание GWD2004































































































































































































Результаты поиска

Содержание GWD2004

Отзывы:

Ricoh GWD2004, Руководство по эксплуатации, Страница: 167 / 190

Результаты поиска

Содержание GWD2004

Отзывы: