Ricoh GWD2004 Скачать руководство пользователя страница 143

Страница: 143 / 190

Programs

125

Programs

You can store frequently used copy job settings in the machine memory and re-
call them for future use.
You can store up to 10 programs.

Note

❒

When a specified program is registered as the default, its values become the
default settings, which are displayed without pressing the

{

Program

}

key,

when modes are cleared or reset, and after the operation switch is turned on.
See “Registering Defaults in Initial Display”.

❒

Paper settings are stored based on paper size. So if you place more than one
paper tray of the same size, the paper tray prioritized with User Tools (Sys-
tem Settings) will be selected first. See “Tray Paper Settings”, General Settings
Guide.

❒

Programs are not deleted by turning the power off or by pressing the

{

Clear

Modes

}

key.

Reference

p.129 “Registering Defaults in Initial Display”
“Tray Paper Settings”, General Settings Guide

Storing a Program

Stores a program.

Edit the copy settings so all functions you want to store in this program are
selected.

Press the

{

Program

}

key.

ATY057S

Содержание GWD2004































































































































































































Результаты поиска

Содержание GWD2004

Отзывы:

Ricoh GWD2004, Руководство по эксплуатации, Страница: 143 / 190

Результаты поиска

Содержание GWD2004

Отзывы: