Ricoh FT8680OM Скачать руководство пользователя страница 144

Страница: 144 / 160

When removing misfed paper

❐

Since some parts of the copier are supplied with high electrical voltage, touch
only the parts specified in the instructions on the sticker inside the machine’s
cover.

❐

When removing misfed paper from sections H and I, use caution. The fusing
unit may be very hot.

☛

See page 4 for the position of the fusing unit.

❐

Do not leave any torn scraps of paper in the machine.

❐

When clearing misfeeds, do not turn off the main switch. If you do, your copy
settings are cleared.

❐

After clearing misfeeds, make sure that all units and levers are returned to their
original positions and all covers are closed.

General operation

❐

Do not touch the anticondensation
switch located inside the left front
door. This switch is used only by
your service representative.

Document Feeder

❐

While originals are fed from the original table to the exposure glass, do not pull
out the originals.

❐

Do not lift the document feeder until the last original has been completely fed
out.

❐

Do not press down or hold originals after inserting them.

❐

Do not press any parts of the document feeder strongly.

tb-eu-8

DO’S AND DON’TS

136

Содержание FT8680OM

































































































































































Результаты поиска

Содержание FT8680OM

Отзывы:

Бренды по названию

Популярные бренды

Ricoh FT8680OM, Руководство по эксплуатации

Результаты поиска

Содержание FT8680OM

Отзывы:

Бренды по названию

Популярные бренды