Ricoh DX 3243 Скачать руководство пользователя страница 36

Страница: 36 / 144

Basics

Placing Originals

When using the exposure glass, place
the originals face down.
When using the ADF, place the origi-
nals face up.

Placing Originals on the
Exposure Glass

Lift the exposure glass cover.

Note

❒

Be sure to lift the exposure glass
cover more than 30

Place the original face down on
the exposure glass. The original
should be aligned with the left
scale.

Left scale

Lower the exposure glass cover.

Adjust print settings as necessary,
and then press the

{

Start

}

key.

Placing Originals in the Auto
Document Feeder

Adjust the guide to the original size.

Insert the aligned originals face
up into the ADF.

Note

❒

To avoid originals misfeeding,
fan the originals before placing
them in the ADF.

Limitation

❒

Approximately 30 originals (80
g/m

, 20 lb) can be inserted at a

time in the ADF. The first (top)
original will be fed first.

Note

❒

To avoid jamming, fan the orig-
inals before placing them in the
ADF.

❒

The guides must fit snugly against
both sides of the stack.

ANT064S

ACY070S

AJK153S

Содержание DX 3243
















































































































































Результаты поиска

Содержание DX 3243

Отзывы:

Бренды по названию

Популярные бренды

Ricoh DX 3243, Руководство по эксплуатации

Результаты поиска

Содержание DX 3243

Отзывы:

Бренды по названию

Популярные бренды