manualshive.com logo in svg

Ricoh DX 3243, Руководство по эксплуатации

Поделиться
Скачать
Ricoh DX 3243 Скачать руководство пользователя страница 10

4

How to Read this Manual

Symbols

This manual uses the following symbols:

R

 

WARNING:

Indicates important safety notes.
Ignoring these notes could result in serious injury or death. Be sure to read these
notes. They can be found in the "Safety Information" section of About This Ma-
chine.

R

 

CAUTION:

Indicates important safety notes.
Ignoring these notes could result in moderate or minor injury, or damage to the
machine or to property. Be sure to read these notes. They can be found in the
"Safety Information" section of About This Machine.

Important

Indicates points to pay attention to when using the machine, and explanations
of likely causes of paper misfeeds, damage to originals, or loss of data. Be sure
to read these explanations.

Note

Indicates supplementary explanations of the machine’s functions, and instruc-
tions on resolving user errors.

Reference

This symbol is located at the end of sections. It indicates where you can find fur-
ther relevant information.

[

]

Indicates the names of keys that appear on the machine’s display panel.

{

}

Indicates the names of keys on the machine’s control panel.

Содержание DX 3243

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды