Ricoh DD 5450, Руководство по обслуживанию на месте, Страница: 245 / 403

243
５
Chapter 5 Paper Ejection Section
● For description of operation
Adjustment procedure
1. With the cancel lever raised up, turn the main
motor shaft. Stop turning when the lever's
roller is positioned at the bottom of the paper
stripper finger cam.
Standard value
● Make sure there is a BLANK master on the
drum by MAKING A BLANK PRINT.
● Check that the clearance between the drum
surface and the paper stripper finger conforms
to the value shown below.
If the clearance is not the standard value:
1. Loosen the screw indicated and use the
stopper to adjust the clearance to the standard
value.
Then retighten the screws.
After adjustment:
● After adjustment, press the drum removal button
to return the drum to its home position.
● Do not touch the drum or rolls when
operating the drum removal button.
● Do not put your hands or fingers inside the
machine during operation. They could be
caught up or crushed in the machinery,
resulting in injury.
6 Paper Ejection Section
(1) Adjusting the Paper Stripper Finger Clearance
HELP-006 → See page 308
→ See page 150
Lever
Screw
Paper stripper finger
Drum
surface
Lever's roller
Main motor shaft
Cancel lever
0.8mm
IMPORTANT:
WARNING
Item Standard value
Standard value 0.8 mm – 1.0 mm
REFERENCE
6