Ricoh D3GF Скачать руководство пользователя страница 144

Страница: 144 / 187

4.System Maintenance

138



NEVER rename or delete the filename and the extension of the clone image file (*.fci), or

restoration will fail.



The folder and file created are named with a pre-fix "RICOH MTSC3_L50B" followed by

the date and time the clone image was created.



Multiple clone image files of the same product can be saved on the same USB flash drive.

Every clone image file will have a different date and time stamp.

17.

Rename the folder to enable easy identification of the clone image file, for example, as shown in

below:

CustomerName_ModelName_Version_SerialNumber_Date

e.g.: Susie_E-25C_V1_SN00000000111_201603030857



You can rename the folders, and move the folders anywhere on the USB drive, or on any other

storage location. Make sure to keep the *.fci file in the folder.



Use a descriptive and consistent approach when renaming folder names.

18.

Remove the USB flash drive in a safe way from the PC.



Do not leave the USB flash drive connected to the Windows PC. If the Windows PC starts

up or reboots with the USB flash drive connected, system corruption may occur.

Restore: Transferring Clone Image Files to E-25C



If you will be replacing hardware components of the E-25C, it is best to complete the

replacements before using the Fiery Clone Tool.



The Fiery Clone Tool cannot restore an image to a smaller capacity replacement HDD.



If the USB flash drive used for the restoration process is different from the one used to create

the backup or has been reformatted or have been deleted or transferred of then files, recreate

a bootable USB flash drive installed with the Fiery Clone Tool. Then drag and drop the entire

Содержание D3GF




























































































































































































Результаты поиска

Содержание D3GF

Отзывы:

Похожие инструкции для D3GF

Бренды по названию

Популярные бренды

Ricoh D3GF, Руководство по обслуживанию на месте

Результаты поиска

Содержание D3GF

Отзывы:

Похожие инструкции для D3GF

Бренды по названию

Популярные бренды