Ricoh D391, Руководство по обслуживанию

Страница: 285 / 490

6. Rotate the trimmings buffer pulley [1] counter-clockwise to move the trimmings buffer to the right.
7. Follow the procedure in the previous section to remove the jammed scraps from the trimming unit.
8. Insert your hands from the front of the bookbinder to remove the jammed sheets, pulling them in the
direction of paper feed or paper exit.
Low Performance Mode
Moving to Low Performance Mode
When an error occurs in a location that is neither located in nor affects paper feed in the horizontal feed
path:
• The current settings are written in EEPROM so the horizontal feed path can still operate in lower
performance mode. In low performance mode only the horizontal feed path can be used, but only
for downstream delivery.
• The machine must be cycled off/on to put the bookbinder in the low performance mode.
Low Performance Conditions
Here is a summary of the conditions that put the bookbinder in the low performance mode:
• The error must have no effect on the operation of the horizontal transport path.
• If a jam does occur in the horizontal path, the jam can be easily removed.
• When the error occurred all units where in positions that permit horizontal paper transport.
Unit Position Where Horizontal Transport Possible
Sub Grip Sub grip HP sensor (S37)
Main Grip Rotate HP Sensor (S43)
Gluing Unit Glue Vat HP Sensor (S73)
Cover Path Closed
Spine Plate Closed
Canceling Low Performance Mode
See "Replacement and Adjustment > Common Procedures > Setting and Releasing Low Performance
Mode".
Jams
283
4