Ricoh Caplio RR-1, Инструкции по эксплуатации, Страница: 66 / 160

66
■
Selecting Manual White Balance (M)
1
Set the mode dial to one of the following:
[
• • ] and press the WB button.
2
Press the or button to select Manual
White Balance (M), aim the camera so that
a white subject fills the screen and press
the ENTER button.
The optimum white balance is set at this point.
3
If you are satisfied with the white balance
that has been set, press the ENTER button.
●
To finely adjust the white balance or change
the color
Press the , , or button before pressing the
ENTER button. Adjusting is available until “ R
B ” on the screen disappears.
Note
• You cannot use the flash to
take a picture in manual white
balance mode.
WHITE BALANCE
BACK:CANCEL SEL.:ENTER
AUTO
M
WHITE BALANCE
R
B
+
+
–
–
BACK:CANCEL SEL.:ENTER