Ricoh Caplio RR-1, Инструкции по эксплуатации, Страница: 21 / 160

21
Getting Started
1
This section explains how to load and charge the
battery, and how to connect the AC adapter to power
the camera from a household electrical outlet.
Charging the Battery
When using the camera for the first time or when the
battery symbol (
) lights, charge the battery to its full
capacity following the procedure described below.
1
Insert the connector of the power cord into
the battery charger.
2
Insert the plug on the other end of the
power cord into an electrical outlet.
3
Set the battery on the battery charger.
Charging will start and continue as shown below.
When charging is completed, disconnect the power
plug from the electrical outlet.
Powering the Camera
Lights red
Lights green
Lamp off
CHARGE
Contents
lamp
Charging has started.
The completion of charging
(90% of full charge), after
approximately 75 min.
* The battery can be used at this point if
you are in a hurry.
Full charge has been reached,
approximately 35 min. after the
lamp lights green.