Ricoh BY1000 Скачать руководство пользователя страница 247 | Manualshive

Страница: 247 / 250

background image

247

Additional Information

All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the
following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the follow-

ing disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the fol-

lowing disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledg-

ment:
This product includes software developed by the NetBSD Foundation, Inc. and its contributors.

4. Neither the name of The NetBSD Foundation nor the names of its contributors may be used to endorse or

promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS ''AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPE-
CIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Authors Name List

All product names mentioned herein are trademarks of their respective owners.
The following notices are required to satisfy the license terms of the software that we have mentioned in this doc-
ument:

z

This product includes software developed by the University of California, Berkeley and its contributors.

z

This product includes software developed by Jonathan R. Stone for the NetBSD Project.

z

This product includes software developed by the NetBSD Foundation, Inc. and its contributors.

z

This product includes software developed by Manuel Bouyer.

z

This product includes software developed by Charles Hannum.

z

This product includes software developed by Charles M. Hannum.

z

This product includes software developed by Christopher G. Demetriou.

z

This product includes software developed by TooLs GmbH.

z

This product includes software developed by Terrence R. Lambert.

z

This product includes software developed by Adam Glass and Charles Hannum.

z

This product includes software developed by Theo de Raadt.

z

This product includes software developed by Jonathan Stone and Jason R. Thorpe for the NetBSD Project.

z

This product includes software developed by the University of California, Lawrence Berkeley Laboratory
and its contributors.

z

This product includes software developed by Christos Zoulas.

z

This product includes software developed by Christopher G. Demetriou for the NetBSD Project.

z

This product includes software developed by Paul Kranenburg.

«
...
245
246
247
248
249
...
»

Содержание BY1000



























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для BY1000

Бренд: Canon Страницы: 300

Бренд: Canon Страницы: 288

Бренд: MAKER MADE Страницы: 21

Бренд: Canon Страницы: 58

Бренд: Canon Страницы: 30

Бренд: Fastjet Страницы: 52

imagePROGRAF GP-540

Бренд: Canon Страницы: 82

Бренд: Konica Minolta Страницы: 15

Бренд: Pantum Страницы: 126

WorkCentre PRO 35

Бренд: Xerox Страницы: 13

WorkCentre Pro 32

Бренд: Xerox Страницы: 14

Бренд: Oki Страницы: 255

Бренд: Xerox Страницы: 8

Бренд: Xerox Страницы: 3

ScreenWriter Colour ScreenWriter

Бренд: Xante Страницы: 446

Бренд: Conceptronic Страницы: 127

Бренд: Anyload Страницы: 12

ECOSYS M3860idn

Бренд: Kyocera Страницы: 483

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды