background image

Preparing the Machine

56

1

Using Adobe PageMaker Version 6.0, 6.5, 
or 7.0

Under Windows 95 / 98 / Me / 2000 / XP, Windows Server 2003, or Windows
NT 4.0 with Adobe PageMaker, you need to copy PPD files to the PageMaker
folder.
PPD files have the .ppd extension in the folder “DRIVERS\PS\WIN9X_ME\(Lan-
guage)\DISK1” on the CD-ROM.
The “WIN9X_ME” folder inside the “PS” folder is for Windows 95 / 98 / Me.
Use the folder at this level that is appropriate for the operating system you are
currently using.
The third folder “(Language)” may be substituted by an appropriate language
name.
Copy the .ppd file to the PageMaker folder.

For PageMaker 6.0 default installation

The directory is “C:\PM6\RSRC\PPD4”.

For PageMaker 6.5 default installation

The directory is “C:\PM65\RSRC\USENGLISH\PPD4”.
The “USENGLISH” may vary depending on your language selection.

For PageMaker 7.0 default installation

The directory is “C:\PM7\RSRC\USENGLISH\PPD4”.
The “USENGLISH” may vary depending on your language selection.

Note

If the driver is not set correctly after copying the “.ppd” file, printing may not
be performed properly.

When using PageMaker, the optional features that can be selected by the
printer driver will not be active. The following procedure describes how to
activate the optional printer features.

A

On the 

[

File

]

 menu, click 

[

Print

]

.

The 

[

Print Document

]

 dialog box appears.

B

Make the necessary settings in the 

[

Features

]

 box.

Содержание Aficio MP 2500SPF











































































































Отзывы: