Ricoh Aficio Color 4006 Скачать руководство пользователя страница 179

Страница: 179 / 228

166

Where to Put your Machine

Power Connection

WARNING:

• Only connect the machine to the power source described on the inside front cover of this

manual.

WARNING:

• Avoid multi-wiring.

• Do not damage, break or make any modifications to the power cord. Do not place heavy

objects on it, pull it hard or bend it more than necessary. These actions could cause an
electric shock or fire.

• Do not plug or unplug the power cord with your hands wet. Otherwise, an electric shock

might occur.

WARNING:

• Make sure the wall outlet is near the machine and freely accessible so that in event of an

emergency it can be unplugged easily.

CAUTION:

•

When you move the machine, unplug the power cord from the wall outlet to avoid fire or electric
shock.

•

When the machine will not be used for a long time, unplug the power cord.

CAUTION:

•

When you pull out the plug from the socket, grip the plug to avoid damaging the cord and causing
fire or electric shock.

• When the main power switch is in the Stand-by positions, the optional anti-condensation heaters are on. In

case of emergency, unplug the machine’s power cord.

• When you unplug the power cord, the anti-condensation heaters turn off.
• Make sure the plug is firmly inserted in the outlet.
• Voltage must not fluctuate more than 10%.

Access to Machine

Place the machine near the power source, providing clearance as shown.

Note

❐

For the required space when options are installed, please contact your service representative.

1. Rear:

more than 10cm, 4.0"

2. Right: more than 37cm, 14.6"
3. Front: more than 70cm, 27.6"
4. Left:

more than 40cm, 15.8"

TRSR120E

Содержание Aficio Color 4006





































































































































































































































Результаты поиска

Содержание Aficio Color 4006

Отзывы:

Ricoh Aficio Color 4006, Руководство по эксплуатации, Страница: 179 / 228

Результаты поиска

Содержание Aficio Color 4006

Отзывы: