Ricoh Aficio C3000, Руководство по эксплуатации, Страница: 156 / 292

Reception
146
3
Reception Modes
There are two ways you can set up the machine to handle incoming calls:
• Manual Reception (an external telephone required)
• Auto Reception
You can change the reception mode only if a standard G3 line is used.
You cannot change the reception mode when a line other than the standard G3
line (G3-2 or G3-3) is used.
Note
❒
An external telephone is required to use this machine as a telephone.
Manual Reception
When a telephone call comes in, the machine rings. If the call is a fax document,
you must switch manually to facsimile mode.
A
When the machine rings, pick up the handset of the external telephone.
B
If you hear beeps, press the
{
Start
}
key, or hold the
{
Facsimile
}
key down for
a few seconds. (The
{
Start
}
key is only available in facsimile mode when an
original is not placed.)
C
Replace the handset of the external telephone. The machine will start receiving.
Note
❒
When the operation switch is off, even if the main power switch is on, you
cannot operate this machine using only the handset of the external tele-
phone. You must first press the operation switch to turn on the machine.
Auto Reception
When a telephone call comes in, the machine automatically receives it as a fax
document. Use this setting on a dedicated fax line.