Ricoh Aficio 1027 Скачать руководство пользователя страница 121

Страница: 121 / 198

113

3. Reception

This section explains reception and reception functions such as printing received
documents or routing received documents to other fax machines.

Types of Reception

This section explains different ways of receiving fax documents.

Immediate Reception

Each page of a fax document is printed as soon as it is received. This method is
used for standard fax documents.

Important

❒

When receiving important fax documents, it is recommended that you con-
firm the contents of the received documents with the senders.

❒

The machine may not be able to receive fax documents when free memory space is low.

❒

If free memory reaches 0% during Immediate Reception, any further recep-
tion becomes impossible and the current communication is terminated.

Note

❒

If the Substitute Reception is used, a fax document is not printed: it is stored
in memory.

❒

This machine supports Standard and Detail resolutions for reception. Faxes
sent at Fine or Super Fine resolution is printed on your machine at Detail res-
olution. This may differ from the sender's intended resolution.

Reference

p.42 “Resolution”
p.114 “Memory Reception”
p.115 “Substitute Reception”
p.128 “Printing Options”

Содержание Aficio 1027







































































































































































































Результаты поиска

Содержание Aficio 1027

Отзывы:

Бренды по названию

Популярные бренды

Ricoh Aficio 1027, Руководство по факсимильной связи

Результаты поиска

Содержание Aficio 1027

Отзывы:

Бренды по названию

Популярные бренды