Ricoh 411402 - EFI Fiery EB-105EX Controller, Руководство по печати

Страница: 124 / 132

C
C-2 Troubleshooting
General printing problems
If this happens Try this
You cannot select or view
one of the queues. • Request that your system administrator enable the queue in Setup.
You cannot connect to
the EB-105EX from a
Windows computer with
Command WorkStation or
the Fiery utilities. • Make sure the connection is configured correctly.
For instructions, see the User Software Installation Guide .
Printing seems to take too
long. • Print to a queue instead of to the Direct connection.
When you print to a queue, the job is stored on the EB-105EX until it can be
processed and printed; when you print to the Direct connection, the job cannot be sent
to the EB-105EX until the previous job is finished processing, so you must wait longer
to use your computer.
One or more Media Type
options are dimmed. • Select an Input Tray that supports the Media Type you are using.
For information on requirements and constraints pertaining to special papers and
transparencies, see
Appendix A .