Richter SAFERUN CMS-S, Инструкция по установке и эксплуатации

Страница: 63 / 106

Maintenance and troubleshooting
ID No. 9230-020-en Version 02 (2020-04) Page 63
7.5 Troubleshooting
Fault Possible cause Remedy
No indicator Power supply switched off Power supply switched on
Self-test
LED a flashes after self-test Main memory fault Replace SAFERUN ® CMS-T converter
LED b flashes after self-test Fault in the firmware Replace SAFERUN
®
CMS-T converter
LED c flashes after self-test System time incorrect Adjust system time
LED d flashes after self-test Data loss or error in the FRAM memory Replace SAFERUN
®
CMS-T converter
LED e flashes after self-test RFID error with data loss or connection
fault Replace SAFERUN ® CMS-T converter
LED f flashes after self-test Version conflict between SAFERUN ® and
the SAFERUN APP
Reset parameter
1)
LED g flashes after self-test Parameter value error Check and correct values
2)
Temperature sensor
LED 1 flashes Connection plug to the SAFERUN
®
CMS-S
containment can not inserted
Insert connection plug to the
SAFERUN
®
CMS-S containment can
Temp. sensor cable broken Replace cable or sensor
LED 1 flashes fast Short circuit at temperature sensor Replace cable or sensor
LED 1 lights up Time has stopped De-energize SAFERUN for 5 sec.
Magnetic sensor
LED 2 flashes red/green Connection plug to the SAFERUN ® CMS-S
containment can not inserted
Insert connection plug to the
SAFERUN ® CMS-S containment can
Broken cable Replace cable