Richter SAFERUN CMS-S, Инструкция по установке и эксплуатации

Страница: 52 / 106

Operation
Page
52 Version 02 (2020-04) ID No. 9230-020-en
6.4 Switching on and off
The SAFERUN
®
CMS-T converter is switched on and off via the
power supply. There is no switch on the SAFERUN
®
CMS-T
converter.
6.4.1 Self-test
The SAFERUN
®
CMS-T converter carries out a self-test after
switching on or after a warm start (see Section 6.4.2) or a
parameterization. The connected sensors, the internal memory
and the parameters are checked during this test.
During the self-test, all LEDs of the SAFERUN
®
CMS-T converter
are switched on for 5 seconds (in the case of a warm start, or for
3 seconds after parameterization).
If errors are found during the self-test, this is indicated by the
corresponding light emitting diodes flashing.
NOTICE
Section 8.4 Error indicators contains a detailed
description of the possible error codes.