Basic troubleshooting
If the following remedies do not correct a problem, disconnect the amplifier
from the power and contact your authorised dealer or service centre.
Warranty
See two-year warranty details enclosed with your Mystique amplifier.
Specifications
Max power output
30W x 2
Frequency response
20–20KHz (± 1dB)
Distortion
<1%
Signal to noise ratio
<86dB
Input sensitivity
225mV
Input impedance
80KOhm
Output impedance
4 Ohm / 8 Ohm
Headphone output
6.35mm
Dimensions
380mm (W) x 300mm (D) x 160mm (H)
Weight
13 Kgs
Tubes vacuum
6L6G x 4; 12AX7 x 2; 12AU7 x 2
Symptom
Cause
Remedy
The unit fails to turn on when
the POWER switch is pressed
Power cord is not properly
plugged in
Firmly plug in the power cord
and switch on at wall
No sound
The volume control is set fully
counterclockwise
Turn volume partially clockwise
Input cables not connected
securely or incorrect input
selected
Check correct input is selected
on front panel and inputs are
firmly connected to the
CORRECT terminals
Speaker systems not properly
connected
Connect them correctly
as per instructions
No sound from left or right
speaker channel
Speaker systems not properly
connected
Connect them correctly
as per instructions
Input cables not properly
connected
Connect them correctly
as per instructions
Sound is unstable with
inadequate or ‘hollow’ low-
range sound
Positive (+) and negative (–)
speaker connections are not
matched
Connect them correctly
as per instructions
PRO
U DLY AU
S TR ALIAN SINC
E 19
86
For more information call (02) 99 811 844
[email protected] www.richter.com.au
Richter Acoustics Pty Ltd, 45/176 South Creek Rd, Dee Why NSW 2099