Richter KSE 100/150, Инструкция по установке и эксплуатации

Страница: 13 / 34

Series KSE/F, KSE-C/F
Page
13
9530-001-en
Revision 19
TM 9549 Edition 11/2018
DN 25/50, 50/80, 80/100
Fig. 8
DN 100/150
Fig. 9
Design signal transmitter for blocking screw
Fig. 10
Legend see Section 10.1
6.11 Design for heavily permeating
media
(Option)
Spindle 802 , insert sleeve 308 , cylindrical pin 561/1 ,
pressure ring 124 , bearing guide 305 and adjusting
screw 538 are made of HC-4. See sectional drawing
in sections 9.2 and 9.3 .
In addition, with the sizes 80/100 and 100/150 the
adjusting screw 538 has a guide bush 307/2 made of
PTFE. See Fig. 11.
Fig. 11
With
size 100/150 the bellows guide 860 made of
PTFE protects the stem guide 306 . See Fig. 12 .
With the other sizes the stem guide is made of HC-4.
Fig. 12
Legend see Section 10.1