Series KA-N/F, KAP-N/F
Page
14
9520-017-en
Revision 15
TM 10477
Edition 05/2022
9.4.3 KAP-N/F with actuator
♦
Mount spring gland follower
502
and packing
gland follower
503
. Tighten packing nuts until
there is no gap between packing gland follower
and spring gland follower. See
Section 1.2
and
10.7
.
♦
Mount bracket
510
with the opening at right
angles to the direction of flow.
♦
Mount coupling
804
and actuator
850
. Observe
the actuator position in accordance with the
actuator operating manual.
9.5 Conversion from lever to
actuator
♦
Select the actuator in accordance with the instruc-
tions of the actuator manufacturer.
♦
Remove lever
203
.
♦
Remove lever stop
577
and plug.
♦
Check the fits of the coupling
804
, bracket
510
and
actuator
850
.
♦
Mount bracket
510
with the opening at right angles
to the direction of flow.
♦
Mount coupling
804
and actuator
850
. Observe the
actuator position in accordance with the actuator
operating manual.
10 Drawings
10.1 Legend
101
main body
102
body end piece
200
ball
202
stem
203
lever
401
seat ring
403
packing bellows
405/1
Thrust ring
502
spring gland follower
503
spring gland follower
510
bracket
526
retaining washer
554/1
washer
557
grounding spring washer
577
lever stop
804
coupling
includes:
500
Ring
952
pressure spring
980/1
round head grooved pin
850
actuator
901/x
hex. screw
902/1
stud screw
904/1
setscrew
914/2
hex. socket screw (F07)
920/x
hex. nut
936/x
tooth lock washer
993 *
padlock
*
not included in the delivery
