Richenpower Y25 AG Drone
User Manual
14
©
2022 Richenpower Copy Right
Remote Controller
The remote controller use 2.4GHz dual-band image transmission system, which has a
maximum control distance of up to 1.24 mi (2 km). A smart phone or pad (Android Only)
and internet connection are required. The remote controller is configurator and tested
before shipping. Please do NOT modify the settings.
Stick mode:default(Mode2)and can be set to mode 1 in App.
Mode 2
:
the left stick serves as the throttle.
Mode 1
:
the right stick serves as the throttle.
●
Other RC devices may cause interference to the remote control signal.
●
To avoid interference between operations, do not operate more than three
aircrafts within a 50 m radius.
Turning the Remote Controller On and Off
The remote controller integrates a 4000mAh 1S chargeable battery. The battery level is
indicated via the battery level LEDs on the front panel.
1. When the remote controller is turned
off, press the Power button once to
check the current battery level,
indicated by the battery level
LEDs. If the battery level is too
low, recharge before use.
2. Press the Power button once, then
press and hold to power on the remote controller.
3. The remote controller beeps when turned on. When linking is complete, the status LED
is solid white and beep stops.
4. Repeat Step 2 to turn off the remote controller.
Use the Remote Controller
Profile
H:
A-B Route
B/none/A
G:
Flight mode
Position/Position/R
oute
A:
RTH
B:
Spray
E:
Pellets Spreader
High/Low/OFF
Содержание 3WWYZ-10A
Страница 2: ......
Страница 31: ...Richenpower Y25 AG Drone User Manual 2022 Richenpower Copy Right 29 ...