background image

Charge device using built-in charge cable:

         Connect attached micro-USB charge cable (1) to any micro-USB device.

         For Apple Lightning devices, use included 8-pin connector adapter (3). 

         Press power button (5) to begin charging. Monitor charge status via screen icon on your device.

        To stop charging, remove cable from your device.

Charge device using your own charge cable:

         Connect USB charge cable included with your own device to 2.1A Output Port (2) on  

Power Bank.

         Press power button (5) to begin charging. Monitor charge status via screen icon on  

your device.

        To stop charging, remove cable from your device. 

*Note:

 Power Bank LEDs remain lit while device is charging and show remaining battery capacity. 

When device is full, Power Bank continues to safely trickle charge device. When charge cable is 
removed, Power Bank shuts off within 10-20 seconds 

Charge 10000 2-Port  
Power Bank:

         Connect USB/micro-USB charge cable (7)  

to micro-USB IN port (4).

         Connect/charge via any powered USB port.  

Use USB/AC adapter (not included) for faster 
results. 

         Four LEDs (6) flash in 25% increments and remain 

solid when corresponding capacity is reached.  

*Note:

 LEDs may not provide an accurate reading 

while battery is recharging. For optimum performance, 
make sure all LEDs have stopped flashing and remain 
solid to ensure full charge capacity. Total recharge 
time (0% - 100%) = about 13 hours.

No tandem charge — disconnect  devices before 
recharging Power Bank.

3

Thank you for purchasing the RichardSolo 10000 mAh 2-Port Power Bank. Please read these instructions before operation 
and save for future reference.

10000 mAh 2-Port Power Bank 

INSTRUCTION MANUAL

5

4

6

1

3

2

OUT1 - Built-in micro-USB output cable (5V 1A)

OUT2 - USB output port (5V 2.1A)

Micro-USB/Lightning 8-pin adapter located behind  
micro-USB cable (1) 

IN - Micro-USB input port (5V 1A)

Power button

4 LED charge capacity indicators (25%, 50%, 75%, 100%)

USB/micro-USB charge cable 

(Not shown in diagram)

1

2

3

4

5

6

7

Check remaining 
charge capacity:

Tap/release power button (5) 
to check remaining power 
bank charge capacity:  
1 LED flashing = less than 
25%; 1 LED solid = about 
25%; 2 LEDs = about 50%;  
3 LEDs = about 75%; 4 LEDs 
= about 75-100%.

Specifications:

Capacity: 10000 mAh

Cell Type: Li-polymer battery 

Input: DC 5V 1A

Port 1 Output: DC 5V 1A 
(built-in micro-USB cable)

Port 2 Output: DC 5V 2.1A

Size: 5.79" x 3.0" x 0.55"  

(14.7 x 7.7 x 1.4 cm)

Weight: 10.0 oz. (283.5 g)

USB Compatibility:

Port 1 (1A)

: built-in cable for 

micro-USB d Lightning 
adapter for 8-pin Apple devices

Port 2 (2.1A):

 iPhone/iPod, 

smartphones, MP3 players, 
iPad/tablets (use your own 
cable)

Package Contents:

10000 mAh 2-Port Li-polymer 

battery

USB/micro-USB charge cable

Instructions

1

2

1

1

2

2

3

3

4

Отзывы: