PAGE 1 OF 2
V-3
STOP
DON’T RETURN TO STORE!
COURTYARD CREATIONS INC.
Attention:
Make sure that each bolt needed for all steps matches the
corresponding figure to ensure proper assembly.
Step 1:
Open the seat/back assembly (#1) and place it on to a
non-abrasive surface, such as a carpet. See Figure 1.
Step 2:
At the rear of the seat/back assembly (#1), fasten the seat
and the back by using bolts (#4). Keep the bolts loose.
See Figure 2.
Note:
The bolts on the seat/back assembly (#1) should be loose
before assembling the chair. See Figure 1.
FIGURE 2
1
FIGURE 1
HEX.KEY WRENCH 4MM
HEX.KEY WRENCH 6MM
BOLT M6*14
BOLT M6*35
RIGHT LEG
SEAT/BACK ASSEMBLY
BOLT M6*15
LEFT LEG
17KAA0101----Y4
17KAA0201----Y4
17C40A0712001YX
17C40A0705001YX
17C02A0755131YX
KTS8160-CS03
KTS8160-CS02
KTS8160-CS01
1
1
8
9
7
6
5
2
2
4
1
1
1
2
MATERIAL CODE
PART
Q’TY
1
3
4
PART
NO.
PARTS LIST
KTS8160
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
1
4
#4 BOLT M6*15
Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children. Children should
always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
!
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
15
HEX.KEY WRENCH 10MM
1
17KAC3101----Y3
