RL-350 Series Wheelchair Scales
12
Visit our website
4.0
Configuration
Options and parameter setup are done through the scale configuration.
4.1 Setup Switch
Access to the setup switch is located under the tilt stand cover. Use a Phillips head screwdriver to remove the four screws
holding the cover in place (shown below — left photo).
Figure 4-1. Setup Switch Location
4.2 General Navigation
Use the buttons on the front panel to navigate through the menus and parameters.
4.2.1 Change Parameters
• Press
to scroll through the menus and/or parameters
• Press
to enter a displayed menu and/or parameter
• Press
or
to scroll through values
• Press
to save the displayed selection and move to the next parameter
4.2.2 Enter Numbers
• Press
to enter parameter value
• Press
or
to increment/decrement numbers
• Press
to move to the next digit
• Press
to save value and move to the next parameter
4.2.3 Save and Return to Main Menu
• When a parameters selection/value is correct, press
. The next parameter displays
• When all parameters selections/values are correct,
SAVE
displays
• Press
. DONE displays.
• Press
to save settings and return to weigh mode.
Remove four screws to access setup switch
Setup switch location
Battery
compartment
BMI
ENTER
ENTER
ENTER
BMI
ENTER
ENTER
ENTER
ENTER
Содержание RL-350-5
Страница 30: ...RL 350 Series Wheelchair Scales 26 Visit our website www RiceLake com ...
Страница 31: ......
