Rice Lake REVOLUTION 682 Synergy Plus, Техническое руководство

Страница: 56 / 130

682 Synergy Plus
48 Visit our website www.RiceLake.com
4.5.8 Setpoint Menu
The following sections provide flow charts and descriptions for the Setpoint menu.
Figure 4-21. Setpoint Menu
Table 4-20. Setpoints Menu Parameters
Parameter Description
Setpoint
Configuration
Access to configuration parameters and settings for up to eight setpoints; Settings: Setpoint 1-8
Kind – Setpoint Kind; Settings: Off (default), Gross, Net, Negative Gross, Negative Net, Accumulate, Positive Relative,
Negative Relative, Percent Relative, Pause, Delay, Wait Standstill, Counter, Auto-Jog, Center of Zero, In Motion,
In Range, Batch in Process, Timer, Concurrent, Time Of Day, Always, Never
Batching Batch sequence runs when set to Auto or Manual; Settings:
Off (default)
Auto – Allows the batch sequence to repeat automatically once it has been started
Manual – Requires a Batch Start input/command to run the batch sequence
Setpoint
Configuration
Batching Batching
Setup Tare User
Setpoint Digital I/O Stream Format
Setpoint 1 Setpoint 2-8 Setpoint 8
Kind Kind Kind
In Range Auto-Jog In Motion Center of Zero
Accumulate Off Gross Negative Gross Net Negative Net Never
Counter
Wait
Standstill
Negative
Relative Percent
Relative
Delay Pause
Positive
Relative
Batch in
Process
Concurrent Timer
Always Time of Day Never
Section 4.5.8.1
Section 4.5.8.3
on page 50
Section 4.5.8.1
Section 4.5.8.3
on page 50
Section 4.5.8.2 on page 49
Section 4.5.8.3 on page 50 Section 4.5.8.3 on page 50
Section 4.5.8.2
on page 49
Section 4.5.8.3
on page 50
Section 4.5.8.2
on page 49