Rice Lake REVOLUTION 682 Synergy Plus, Техническое руководство

Страница: 120 / 130

682 Synergy Plus
112 Visit our website www.RiceLake.com
16.6 Stream Format Tokens
Table 16-3. Stream Format Tokens
Format Identifier Defined By Description
<P[G | N | T]> STRM.POS# n
STRM.NEG# n
Polarity – Specifies positive or negative polarity for the current or specified
(Gross/Net/Tare) weight on the source scale; Possible values are SPACE, NONE,
+ (for STR.POS# n ) or – (for STR.NEG# n)
<U[P | S | T]> STRM.PRI# n
STRM.SEC# n
STRM.TER# n
Units – Specifies primary, secondary or tertiary units for the current or specified weight
on the source scale
<M[G | N | T]> STRM.GROSS# n
STRM.NET# n
STRM.TARE# n
Mode – Specifies gross, net or tare weight for the current or specified weight on the
source scale
<S> STRM.MOTION# n
STRM.RANGE# n
STRM.OK# n
STRM.INVALID# n
STRM.ZERO# n
Status for the source scale – Default values and meanings for each status:
• STR.MOTION# n M In motion
• STR.RANGE# n O Out of range
• STR.OK# n <space> OK
• STR.INVALID# n I Invalid
• STR.ZERO# n Z COZ
<UID> UID Unit ID number – Specifies the unit identification number as an alphanumeric value up
to 6 characters long
<B [–]n,…> See descriptions below Bit fields. Comma-separated sequence of bit field specifiers; Must be exactly 8-bits;
minus sign ([–]) inverts the bit
B0 -- Always 0
B1 -- Always 1
B2 Configuration =1 if even parity
B3 Dynamic =1 if MODE=NET
B4 Dynamic =1 if COZ
B5 Dynamic =1 if standstill
B6 Dynamic =1 if gross negative
B7 Dynamic =1 if out of range
B8 Dynamic =1 if secondary/tertiary
B9 Dynamic =1 if tare in system
B10 Dynamic =1 if tare is keyed
B11 Dynamic =00 if MODE=GROSS
=01 if MODE=NET
=10 if MODE=TARE
=11 (not used)
B12 Dynamic =00 if UNITS=PRIMARY
=01 if UNITS=SECONDARY
=10 if UNITS=TERTIARY
=11 (not used)
B13 Configuration =00 (not used)
=01 if current DSPDIV=1
=10 if current DSPDIV=2
=11 if current DSPDIV=5
B14 Configuration =00 (not used)
=01 if primary DSPDIV=1
=10 if primary DSPDIV=2
=11 if primary DSPDIV=5
B15 Configuration =00 (not used)
=01 if secondary DSPDIV=1
=10 if secondary DSPDIV=2
=11 if secondary DSPDIV=5
B16 Configuration =00 (not used)
=01 if tertiary DSPDIV=1
=10 if tertiary DSPDIV=2
=11 if tertiary DSPDIV=5