Rice Lake Revolution 680 Synergy Plus, Техническое руководство

Страница: 23 / 80

Operation
© Rice Lake Weighing Systems ● All Rights Reserved 17
3.4.5 Remove Stored Tare Value
1. Remove all weight from the scale and wait for the LED to light. The display reads the negative tare value and
the LED is lit.
2. Press to zero the scale, if needed.
3. Press (or in OIML mode). Display changes to gross weight and the Gross LED lights.
3.4.6 Preset Tare (Keyed Tare)
Tare mode must be set to keyed or both for the preset tare feature to function.
1. Remove all weight from the scale and wait for the LED and LED to light.
2. With the scale displaying zero weight, use the numeric keypad to enter the tare weight value and press .
3. The display changes to net weight and the Net LED and PT LED light, confirming the preset tare was entered.
Press again while the LED is lit, or enter a keyed tare of zero to remove the preset tare value.
3.4.7 Display a Stored Tare
1. Press .
audit
displays.
2. Press or until
tare
displays.
3. Press .
disptar
displays.
4. Press . The stored tare value displays.
5. Press twice to return to weigh mode.
If there is not a tare in the system, the value displayed is zero .
3.4.8 Clear a Stored Tare
1. Press .
audit
displays.
2. Press or until
tare
displays.
3. Press .
disptar
displays.
4. Press .
clrtare
displays.
5. Press or to clear the stored tare value.
ok
displays.
6. Press or to return the audit menu.
7. Press to return to weigh mode.
Note