Rice Lake MSI-4260M, Техническое руководство

Страница: 6 / 38

MSI-4260M Port-A-Weigh Crane Scale
2 Visit our website www.RiceLake.com
2.0 Installation
This section provides an overview of MSI-4260M Port-A-Weigh crane scale installation instructions.
The MSI-4260M features a heavy duty, IP66 cast aluminum enclosure. The MSI-4260M installs easily by hanging it on a crane
using properly sized shackles.
Refer to the Crane Scale Safety and Periodic Maintenance Manual (PN 153105) for safe loading and rigging
guidelines when installing the MSI-4260M.
Regular maintenance inspections of the lifting system should be performed to ensure safety.
Pay attention for signs of stress on any element in the load train.
Use the appropriate interface hardware for the capacity of the scale.
• If the interface hardware does not fit properly, Rice Lake Weighing Systems can supply the MSI-4260M with oversize
lifting eyes or shackle interfaces
• If the crane hook is too large to fit in the lifting eye with single point interface then install the scale using adaptive rigging
• If multiple attachments are needed, use a shackle or ring to attach the multiple lines to keep a single point attachment to
the scale
Using an oversize shackle or hook to interface with the MSI-4260M can cause off center loading and stress
points that reduce the life of the lifting eye or hook.
Single point attachments are necessary to ensure the safety and accuracy of the scale system.
2.1 Unpacking
Immediately after unpacking the MSI-4260M from the shipping container, visually inspect the product to ensure all components
are included and undamaged. If parts were damaged in shipment, notify Rice Lake Weighing Systems and the shipper
immediately. If the MSI-4260M must be returned, it must be properly packed with sufficient packing materials.
Whenever possible, use the original carton when shipping the unit back. It is good practice to retain the shipping container for
future shipping or transporting of the unit.
2.2 Dimensions
Figure 2-1. Product Diagram
A B C D E F G H
16.28'' (413.5 mm) 10.00'' (254.0 mm) 13.52'' (343.4 mm) 2.50'' (63.5 mm) 3.50'' (88.9 mm) 9.28'' (235.7 mm) 1.35'' (34.3 mm) Ø 1.03'' (26.1 mm)
Table 2-1. Product Dimensions (PN 194593)
WARNING
IMPORTANT