Ishida WM-Ai
Cleaning, Sanitizing and Inspection Instructions
Use the following instructions to clean, sanitize and inspect the WM-Ai.
WARNING
Discharge unit
Bottom catch
tray (not
shown)
Infeed unit
Lift unit, wrap
plates and seal
rollers
Display
Important
This document can be viewed and downloaded from the Rice Lake Weighing Systems website at
Failure to heed may result in serious personal injury or death.
Always turn off the machine before cleaning or servicing.
Never touch this machine without training and authorization from your supervisor.
Guards must be in place before plugging in and turning on the machine.
Always keep your fingers, hands and clothing away from sharp or moving parts.
Failure to follow these instructions could result in damage to the equipment and void the
warranty.
Cleaning Points
Figure 1 calls out several parts of the WM-Ai that should be cleaned daily.
Figure 1. WM-Ai Cleaning Points
January 27, 2016
PN 174149
