manualshive.com logo in svg

Rice Lake IQ plus 710, Руководство по установке, Страница: 49 / 76

Поделиться
Скачать
Rice Lake IQ plus 710 Скачать руководство пользователя страница 49

46

IQ plus 710 Installation Manual

NOTE: 

The <G2>, <N2>, and <T2> commands listed in Table 6-1 print the gross, net, and tare weights in

non-displayed units—that is, in the units not currently displayed on the indicator.

6.2

Default Ticket Formats

Table 6-2 shows the default print formats for the IQ plus 710 and lists the conditions under which each print
format is used. The HDRFMT format is used to specify header information that can be used by the other ticket
formats. The contents of the HDRFMT format can be inserted into any other ticket format using the <AE>
formatting command.

<NL

nn>

New line (

nn

 = number of termination (<CR/LF> or 

<CR>) characters)*

√

√

√

<SP

nn>

Space (

nn

 = number of spaces)*

√

√

√

<SU>

Toggle weight data format (formatted/unformatted)**

√

√

√

NOTES:

Gross, net, and tare weights, SV1 setpoint weight are 9 digits in length, including sign (10 digits with decimal point), followed by 
a space and a two-digit units identifier. Total field length with units identifier is 12 (or 13) characters.

TR1, TR2, and TR3 truck ticket weight data includes keywords INBOUND, KEYED, RECALLED, as necessary.

ID and consecutive number (CN) fields are 1–7 characters in length, as required.

Ticket header (AE) inserts information specified for the HDRFMT header format.

*  If 

nn

 is not specified, 1 is assumed. Value must be in the range 1–99.

**  After receiving an SU command, the indicator sends unformatted data until the next SU command is received. Unformatted 
data omits decimal points, leading and trailing characters. 

Format

Default Format String

Used When

GFMT

GROSS<G><NL2><TD><NL>

Normal mode, no tare in system

NFMT

GROSS<G><NL>TARE<SP><T><NL>NET<SP2><N>
<NL2><ID><NL>

Normal mode, tare in system

EDPFMT

GROSS<G><NL2><TD><NL>

Normal mode, PRNDEST=BOTH (SERIAL
menu). GFMT (or NFMT) print format is sent to
printer port simultaneously.

TRWIN

<NL>ID<SP><ID><NL2>GROSS<TR1>
<NL2><DA><SP><TI><NL>

Truck mode (TARE100 

≠

 OFF), when truck ID is

entered 

TRWOUT

<NL6>ID<SP><ID><NL2>GROSS<TR1><NL>TARE<SP><TR2>
<NL>NET<SP2><TR3><NL2><DA><SP><TI><NL>

Truck mode (TARE100 

≠

 OFF), when PRINT

key pressed

SPFMT

<SV1><SP><SV2><NL>

Setpoint push print operation (PSHPRNT=ON)

HDRFMT

COMPANY NAME<NL>STREET ADDRESS<NL>
CITY, ST   ZIP<NL2>

N/A

NOTE: In OIML and CANADA modes, the letters 

PT

 (preset tare) are automatically inserted after the printed tare weight.

Table 6-2. Default Print Formats

Command

Description

Ticket Format

GFMT/NFMT/

EDPFMT

TRWIN/TRWOUT

SPFMT

Table 6-1. Print Format Commands (Continued)

Содержание IQ plus 710













































































Отзывы:

Нет отзывов