Rice Lake Challenger 3 MSI-3460, Техническое руководство

Страница: 5 / 46

Introduction
© Rice Lake Weighing Systems ● All Rights Reserved 1
1.0 Introduction
The MSI-3460 Challenger 3 is a combination of the sound and proven mechanical design of the industry standard Challenger
with today’s most advanced electronics. It provides a superb feature set unmatched by any scale in its class or price range.
The multi-purpose hanging scale is ideal for situations in which headroom is at a minimum. The MSI-3460 is versatile, reliable,
accurate, and easy to operate. The MSI-3460 is designed to meet or exceed the requirements of all regulatory agencies.
RF remote control and remote display options are available to further enhance the safety and usability of the MSI-3460 .
Manuals and additional resources are available from the Rice Lake Weighing Systems website at
www.ricelake.com
Warranty information can be found on the website at
www.ricelake.com/warranties
1.1 Features
• Meets or exceeds U.S. and international safety and environmental standards
• Provides up to 50 hours of weighing time when utilizing the automatic sleep mode
• Automatic power off conserves battery life by turning off after sensing no activity during set amount of time
• Automatic sleep mode preserves the battery life by dimming the LED display after a set number of minutes of no activity
• Rugged construction throughout. Buttons are sealed and rated for over one million operations
• Precise high resolution (2500 division standard and up to 10,000 possible) 24 bit A/D conversion coupled with advanced
RISC micro controller provides world class features and accuracy
• Five large, 1.5'' (38 mm) LED digits for clear weight reading from a distance
• Easy digital calibration assures reliable, repeatable measurements. Calibration can be performed without test weights
using C-Cal technology
• Selectable for lb/kg unless prohibited by Legal for Trade regulations
• Automatic or manual weight totalization for loading operations
• Easily customized for special applications
• High-speed PEAK mode for wire and rope stress analysis
• Three setpoints can be set for any in-range weight for operator alerts or process control
• ScaleCore
™
technology provides quick and easy software updates and backup for calibration and setup
• Two service counters ensure load train safety by warning the user to perform a load train safety check when the lift count
gets high or the scale has been overloaded repeatedly
1.2 Options
• RF remote controller
• RF modem for connectivity to MSI-8000 RF or MSI-8004 HD Remote Display and/or remote receiver Model MSI-7000/1
RF Receiver and Remote Scoreboard
• MSI-8000 RF Display
• MSI-8004 HD Remote Display
• 85-265 VAC input power
• Audible alarm (triggered by setpoint 1)
1.3 FCC Compliance
United States
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Canada
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio
Interference Regulations of the Canadian Department of Communications.