Rice Lake BenchPro Series, Руководство по эксплуатации

Страница: 11 / 42

Setup 7
2.0 Setup
2.1 Unpacking the Scale
Remove all contents from the packaging. Each carton contains the following:
• Scale with operator display attached
• In-line power supply
• US power cord
• USB cable
• RS-232 cable (not included with model BP1214-75S with plastic weight platter)
• Stainless steel, plastic weight platter or ball top weight platter (on selected models)
Inspect contents for damage. Contact Rice Lake Weighing Systems and the shipper immediately if any items are
damaged.
2.2 Scale Setup
1. Remove the white protective cover from the stainless steel shroud.
2. Place the scale on a sturdy, level surface near a power outlet. Ensure the scale or weight platter are not
touching any objects.
3. Level the scale by adjusting the leveling feet until the bubble level (under the weight platter) is within the
circle.
4. Tighten the jam nut using a 12 mm or 1/2 '' wrench once the scale is level.
2.3 Power
Power the BenchPro Series scale with one of the following:
• AC power supply
• Four AA alkaline batteries
• USB HID 2.0 Powered communications port (can be used as a stand alone device or interface to a 3rd party
software program that recognizes devices following USB HID requirements). Loss of power to a USB
device will turn off the scale
Once the scale is connected to a power source, the Power LED illuminates. Press to power on the scale.