Rice Lake BenchPro BP-P, Руководство по эксплуатации

Страница: 9 / 32

Operation
© Rice Lake Weighing Systems ● All Rights Reserved 5
3.1.1 Initial Power Up
Press to power on the scale.
Upon initial power up, the scale briefly displays the following:
•

(type of firmware installed)
• Software version number
• 
See Section 7.1 on page 22 if another message other than

displays during startup.
3.1.2 Weigh Mode
1. Ensure the scale is at zero prior to placing an item on the scale.
2. If the scale is not at zero weight, press
.
indicates the scale is at a stable zero
.
3.1.3 Tare
Tare function must be enabled in the configuration menu for the tare key to be functional. The factory default setting is disabled.
1. Place an item or empty container on the scale. The weight value displays.
2. Press . The weight value displays as zero and N displays to indicate the scale is displaying the net weight.
3. Remove the item or container from the scale platform and press to return the scale to the gross mode.
The weight value is zero and G/B displays, indicating the scale has returned to the Gross/Brutto mode.
Enabling tare could violate metrological approvals.
Note
0
Note