Rice Lake BenchPro BP-P, Руководство по эксплуатации

Страница: 6 / 32

BenchPro Postal BP-P Scale
2 Visit our website www.RiceLake.com
2.0 Setup
This section provides information regarding the setup of the BenchPro Postal scale.
2.1 Unpacking the Scale
Remove all contents from the packaging. Inspect contents for damage. Contact Rice Lake Weighing Systems and the shipper
immediately if items are damaged. Each carton contains the following:
• Scale with operator display attached
• In-line power supply
• U.S. power cord (three-prong AC power adapter)
• USB cable
• RS-232 cable
• Stainless steel weigh platter
2.2 Scale Setup
1. Remove the protective cover from the weigh platter.
2. Place the scale on a sturdy, level surface near a power outlet. Ensure the scale and weigh platter are clear of
obstructions.
3. Level the scale by adjusting the leveling feet until the bubble level (under the weigh platter) is within the circle.
4. Tighten the jam nuts on the feet of the scale, once the scale is level.
2.2.1 Display Mounting
A display mount is included with each scale and comes assembled to the scale’s die-cast base housing. The included operator
display uses two magnets to attach to the mount during use. The display mount can be detached from the scale and mounted
to a table or on a wall.
Figure 2-1. Display Mount Configurations
Scale or Table Mount
Orientation
Wall Mount
Orientation