Rice Lake 250-10-2, Техническое руководство

Страница: 8 / 28

250-10-2 Bariatric Handrail Scale
4 Visit our website www.RiceLake.com
2.2.1 Adjusting Scale Feet
There must be adequate clearance between the scale base and the floor so screw each foot out counterclockwise two full turns.
This will ensure that there is enough clearance between the scale base and the floor.
Gently set the scale base down to the floor. There should be minimal clearance between the scale base and the floor without
having the scale base actually touching the floor. By not having clearance around the scale base will cause inaccurate
weighments.
It’s also important to make sure that the scale is completely level. Gently press down on all corners of the scale base to ensure
that there are no high spots or rocking of the scale base.
2.2.2 Insert Batteries
The six AA batteries supplied with the scale provide an average of 25 hours of continuous use.
To install the batteries:
1. Turn thumbscrew counterclockwise then remove battery cover.
2. Insert batteries into the battery chamber as illustrated.
Figure 2-2. Battery Chamber
3. Put the cover in place and turn the thumbscrew clockwise to secure.
Remove the batteries prior to storing if the product is not going to be used for an extended period of time.
If the LO BAT indicator activates, for accurate weighing, replace the batteries or connect the scale to an AC power
source as soon as possible.
2.2.3 Power Connection
An optional AC power adapter can be used when a power outlet is available.
Only use power adapters supplied by or purchased from Rice Lake Weighing Systems. The use of a power
adapter not from Rice Lake Weighing Systems voids the warranty.
Figure 2-3. Power Connection Site
The battery annunciator on the display turns off when using an AC power connection.
The brightness of the backlight is reduced to 60% when using battery power.
Thumb Screw
Note
Note
IMPORTANT
AC Power
Connection
Note