Rice Lake 150-10-6, Техническое руководство

Страница: 11 / 30

Operation
© Rice Lake Weighing Systems ● All Rights Reserved 7
3.0 Operation
This section describes the front panel and includes procedures for operation of the scale.
Figure 3-1. Front Panel Keypad
Key Descriptions
The unit has nine front panel keys. Key functions are described in the table below.
The front panel keys are very sensitive, so only a gentle press is required.
Key Name Function
On/Off Powers the scale on or off.
Print
LB/KG
Sends data out from the RS-232 port. Allows to toggle between kilograms and pounds providing that it is enabled
in Configuration mode. Cannot toggle while in the BMI mode.
Zero Only functions if the current weight is stable and less than 2% of the capacity of the scale. Anything over 2%
requires a recalibration.
Hold Release Displays most current weight value on the display and holds that value when the patient is off the scale. A second
press releases the weight value. Not active while in BMI mode.
BMI Pressing the BMI key enables access to the BMI (Body Mass Index) mode (defaults when scale is turned on). The
patient is gets on the scale, weight stabilizes and press the BMI key. The display then asks for the patient height
to calculate out the patient BMI.
CLEAR When using the BMI function, the display will be looking for a height entry. Pressing Clear changes this entry back
to 190.0 cm (default) or 5 ft, 7.5 in. Once BMI is displayed, pressing the Clear key exits BMI.
ENTER Used to accept height in BMI mode; accepts the value of the parameter last entered and moves to the next stage.
Pressing and holding Enter during startup will display ID. This is the first setup on entering into configuration mode.
Up/Down Arrows Adjusts the value of the flashing digit/number.
Adjusts height input (0.5 in/0.5 cm) while in BMI mode.
Table 3-1. Scale Key Functions
BMI
CLEAR
ENTER
LB/KG
Hold
Release
Print
Zero
On/Off
IMPORTANT
On/Off
LB/KG
Print
Zero
Hold
Release
BMI
CLEAR
ENTER