1. PLAYER OVERVIEW
2. CHARGING YOUR PLAYER
Make sure the battery is fully charged before using your player, this takes about 2-3 hours. Recharge the player when
the power is low or when the player shuts down. Charging times will vary depending on the amount of residual charge in
the battery.
To charge the battery
Connect the MP3 player to your computer using supplied USB cable. Your player is installed automatically when it is
connected for the first time. When charging, the LED light will be blinking. Once the battery is full, the LED light will be
shut off.
3. TURNING YOUR PLAYER ON AND OFF
Allow the player to be fully charged before turn it on.
To turn your player on or off
Hold the
PLAYER
button for 3 seconds.
4. PLAYING MUSIC
Connect the earphone to the player and turn your player on.
To start playing music
Press
PLAY
to start playing the first song.
To select different song
Press the
NEXT
button to play the next song or press the
PREV
button to play the previous song.
To pause and resume listening to a song
Press the
PLAY
button to pause; press the
PLAY
button again to resume.
To change the volume
Press
+ / -
button to adjust the volume.
5. USB Disk
The player can be used as standard USB disk with operating system of above Wins 98, Mac OS 10.3, Linux Redhat 8.0,
no driver is required. For Wins 98 need driver.